Fajaranugerah

Welding/Mechanical Inspector
  • Batam
  • Fajaranugerah22@gmail.com
  • 081267335095
  • December 22, 1987

About Me

9 years of construction experienced as QC Inspector (Welding, piping and steel
structural) and QA engineer related fabrication, assembly, erection, and installation of oil and
gas facilities (such as : Wellhead Platforms, Central Processing Platform, LNG Processing
modules, Electrical house,FPSO Module, Manifold, Exchanger, Pig Launcher) . Certified and
qualified MIGAS welding inspector, BNSP welding inspector, CSWIP 3.1 welding inspector
level 2 & radiography interpreter ASNT LV.II. Good knowledge and experienced in Welding
inspection, welding technology, welding metallurgy, heat treatment, WPS, PQR, WQT, NDT,
Destructive testing, site acceptance test/ factory acceptance test ( such as hydrotest, pneumatic,
leak test, sensitive leak test), quality procedure preparation & implementation. Familiar with
code and standard (ASTM, API, AWS, ASME). Well knowledge in service inspection, rating,
repair and alteration for piping systems

Education

Bachelor

2006
ITN Malang

Electrical Engineering

Work & Experience

Quality Inspector

August 1, 2019
MCdermott Indonesia

- Read and understand the inspection and test plan - Read and understand drawing (description, rev, BOM,NDT,PWHT) - Patrol inspection and ensure at lay down areas segregated / stainless steel & carbon steel - Ensure WQT & PQR - Verify material to be weld - Ensure correct equipment (such as validation welding machine) - Ensure correct consumable and WPS no - Random check electrode/flux oven calibration record at electrode store - Check fit up prior weld - Check pre heat temperature base on WPS before welding - Ensure tacking and welding carry out as per WPS - Request PWHT, PMI and performed hardness/ferrite test if necessary - Follow up and monitoring repair if any - Follow up daily NDT result then release spool /item for painting or erection - Perform line checking, re-instatement and flange management - Carry out testing (such as hydrotest, pneumatic test or leak test) - Documentation Review and approval (visual, NDT, test package)

QC Inspector

- August 1, 2019
Sembcorp marine

- Visual inspection of completed pipe spools - Check Geometric configuration and completeness of assembly - Check Appropriate fit of components - Check Reinforcement of Welded Branch Connections - Dimensional check including thickness Measurement by UT as specified - Surface condition check including the after temporary attachment removal/NDT - Markings and identification verification - Elaborating and coordinating the welding specifications, and codes/standards - Coordination with the production for all welding procedure specifications and procedures qualifications reports. - Review course and effects of welding defects and take remedial actions - Review of the radiographic film and all NDT reports on a daily basis - Reviewing the inspection and testing methods and procedures for Radiographic, Dye Penetrant, Magnetic Particle, and Ultrasonic inspections - Witnessing of welder qualifications testing and procedures qualification testing - Witnessing any remedial repair welding - Reviewing of the welding summery reports - Checking the hydrostatic test packages for NDT compliance prior to testing - Monitor any Post Weld Heat Treatment on site and review the completed test reporting - Selection of welds for non destructive testing - Recording and listing of defective welds - Monitor the control and issue of welding electrodes - Coordinate the issue of nonconformance reports through the QA/QC manager

QA Engineer

July 1, 2017 - January 1, 2018
PT. BERJAYA GROUP

- Prepare all procedure related to Quality (Welding, piping, structure). - Monitoring implemented all approved procedure.. - Conduct surveillance inspection to fabrication, shop, and storage. - Prepare welding procedure specification as per AWS D1.1 and ASME XI and running PQR. - Carried out mechanical test as related code. - Conduct welder test as per AWS D1.1 and ASME XI - Control Non conformance report

QA/QC Inspector

November 1, 2016 - July 1, 2017
PT HSC Energy Persada

- Material inspection - Review qualified WPS and ITP, acceptance criteria base on client, available procedure, specification codes or standard - Review validation test equipment, inspection method and AFC drawing (Isometric) before fabrication started - Witnessed Welder qualification test and recorded - Check transferred heat number (material traceability) and cutting dimension

QA/QC Inspector

February 1, 2016 - October 1, 2016
PT Angkasa Engineering Indonesia

- Material inspection - Review qualified WPS and ITP, acceptance criteria base on client, available procedure, specification codes or standard - Review validation test equipment, inspection method and AFC drawing (Isometric) before fabrication started - Witnessed Welder qualification test and recorded - Check transferred heat number (material traceability) and cutting dimension - Inspection welding preparation, fit-up (orientation dimension cut length) proper material to be jointed, qualified welder to be welded, welding process and electrode to be used and recorded, monitoring welding parameter again to the approved WPS and filler metal check, interpass temperature, distortion appearance, inspection and visual inspection on weldment, dimension of spool, prepare for NDT request as per requirement - Monitoring welding repairs after tracing NDT defect sketch are given to production - Record completion of weld - Perform line checking, re-instatement and flange management - Carry out testing (such as hydrotest, pneumatic test or leak test) - Documentation completion

QA/QC Inspector

March 2, 2015 - February 2, 2016
PT LGT Indonesia

- Material inspection - Review qualified WPS and ITP, acceptance criteria base on client, available procedure, specification codes or standard - Review validation test equipment, inspection method and AFC drawing (Isometric) before fabrication started - Witnessed Welder qualification test and recorded - Check transferred heat number (material traceability) and cutting dimension - Inspection welding preparation, fit-up (orientation dimension cut length) proper material to be jointed, qualified welder to be welded, welding process and electrode to be used and recorded, monitoring welding parameter again to the approved WPS and filler metal check, interpass temperature, distortion appearance, inspection and visual inspection on weldment, dimension of spool, prepare for NDT request as per requirement - Monitoring welding repairs after tracing NDT defect sketch are given to production - Record completion of weld - Documentation completion

QA/QC Inspector

January 1, 2014 - February 2, 2015
PT Angkasa Engineering Indonesia

Perform fit up inspection - Perform visual welding inspection - Carried out NDT - Documentation completion

QA/QC Inspector

April 3, 2012 - November 7, 2013
PT. Expro

Perform fit up inspection - Perform visual welding inspection - Carried out NDT - Documentation completion

QA/QC Inspector

March 2, 2011 - March 15, 2012
: PT TPCO PAN ASIA

Material receiving inspection - Perform visual thread inspection - Perform Visual welding inspection - Perform coating inspection - Perform final inspection

Skills

Migas Welding inspector,Ikbal M yos (cert no. 912/WI-XXXV/VII/2015)
CSWIP 3.1 Welding Inspector LV.II,CSWIP / TWI (cert no. 112351)
Radiography Intrepeter ASNT LV.II , Ikbal M yos (cert no. 2820/RI-II/RA/2020)
3. BNSP Welding Inspector,BNSP (cert no. 00259 0721 000131 2015)
PMI test, NDT Instrument LTD
API 570 Piping inspector, API
Basic Inspection, Canadian welding bureau

Be the first to review “Fajaranugerah”

Your Rating for this listing

Related Candidates