Derajat Arianto

QC Welding Inspector
  • Tiban Raya C.08 Tiban,Batam-Indonesia
  • Derajatndt@gmail.com
  • +6281270140129
  • Rp.35,000,000 per month
  • January 1, 1987

About Me

Saya memiliki pengalaman sebagai Inspektur las dan sertifikat CSWIP3.1 / 3.0, NDT MT PCN Level II, NDTMT / PT / UT / PAUT Level II.
Saya mampu bekerja secara individu atau tim.
Semoga kualifikasi saya memenuhi kebutuhan Anda.

Education

senior high school

2002-2005

science

Work & Experience

QC Welding Inspector

12-10-2020 - UNTIL Present
PT.SMOE

- Interpretation of all engineering documents, project specification, international standard, code and ITP - Inspection of structural steel works such as Material identification in accordance with drawings, color code and specification before erection. - Monitoring of consumables condition, document, storage, Handling, packing, drying temperature as per client approved procedure. - Preparation IRN for release to client and Check material condition type, size and mill certificates. - Monitoring and review all welding activities before, during, after as per WPS. - Checking weld joint preparation, fit up, alignment, color-coding and transfer heat no all item. - Preparation of joints for NDE as per required inspection class. - Submit and Review NDT Request and report for submit to company. - Coordinating with client and third party for filed inspection. - Verification of weld repair work. - Visual inspection of welded joint profile, surface finish and defects. - Input completed reporting form of the above into the system. - Issue NCR (Non Conformance Report) or any type of defective report. Project Assignments: - FORMOSA 2 OFFSHORE WIND FARM PROJECT

QC Welding Inspector

24-4-2020 - 9-10-2020
PT.MEITECH

Duties and Responsibilities: To ensure effective construction quality control performance by the PETRONAS Project main EPC contractor and this includes: - Interpretation of all engineering documents, project specification, international standard, code and ITP. - Inspection of structural steel works such as Material identification in accordance with drawings and specification before erection. - Monitoring of consumables condition, document, storage, Handling, packing, drying temperature as per project approved procedure. - Check material condition type, size and mill certificates. - Monitoring and review all welding activities before, during, after as per WPS. - Checking weld joint preparation, fit up, alignment, color-coding and transfer heat no all item. - Preparation of joints for NDE as per required inspection class. - Offering of joints and organizing the NDT team. - Submit and Review NDT Request and report for submit to company. - Coordinating with client and third party for filed inspection. - Verification of weld repair work. - Visual inspection of welded joint profile, surface finish and defects. - Input completed reporting form of the above into the system. - Issue NCR (Non Conformance Report) or any type of defective report. - Upon receipt of NCR or similar type of report from client, 3rd party or authorities, identify and conduct corrective action supervising discipline supervisor or subcontractors.

QC Welding Inspector

27-9-2018 - 22-4-2020
PT.DSAW

Project Assignments: - Tyra Redevelopment Project, Client by PT. McDermott and TOTAL. - Rantau Dedap Power Plant, Client by Rekayasa Industri (REKIND). - PHE WMO, Client by PERTAMINA. - Hornsea Offshore Windfarm 2 Project, Client by PT.SMOE and Hornsea. Duties and Responsibilities: To ensure effective construction quality control performance by the Project main EPC contractor and this includes: - Check fit-up lose can and tubular Fabrication and Dimensional Lay-out for cutting. - Review all welder qualification for compliance with project requirement. - Request NDT activity - Verify welding consumables control, welding control records, certificates, and such. - Documentation and quality control procedures. - ITP and quality procedure are in place before start of work. - Line check with client, prepared punch list and close punch list. - Check material condition type, size and mill certificates. - Check consumable condition and document. - Welding monitor Before, during, after as per WPS. - Visual inspection of weld.

NDT PAUT ASNT Level II

1-4-2020 - 28-8-2018
PT.UT QUALITY INDONESIA

Project Assignments: - Turn Around Refinery Unit 4 Balongan, Client by PERTAMINA. Duties and Responsibilities: - Worked for turnaround services Carried out PAUT inspection piping joints of various thicknesses in PERTAMINA REFINERY UNIT 4 Balongan –Indonesia. - Calibration PAUT equipment OMNI SCAN MX 1. - Interpret test results using PAUT technique principle. - Document tests, write reports of tests, and file reports.

QC Welding Inspector

18-9-2017 - 17-3-2018
PT.WEIR OIL AND GAS

Duties and Responsibilities: - Prepare NDT Request activity and ensure all NDT activities based on procedure. - ITP and quality procedure are in place before start of work. - Maintain documentation for all NDT report and Submit all report NDT to client. - Dimensional control, reporting and submit to client. - Welding monitoring Before, during, after. - Responsibilities Carry out Inspection in accordance with ITP. - Verify welding consumables control, welding control records, certificates, and such.

Portfolio

Skills

CSWIP Welding Inspector 3.1
98%
CSWIP 3.0
100%
NDT MT PCN Level II
100%
NDT MT/PT/UT/PAUT ASNT Level II
80%

Be the first to review “Derajat Arianto”

Your Rating for this listing

Related Candidates